FENCER™ Under Cabinet LED Light Fixture Series represents a new generation of under cabinet lighting for kitchens and task lighting. This high quality, ultra bright fixture connects directly to 120V AC electrical currents and is compatible with select wall dimmers
The new multiple output dimmable driver is specifically designed to power large lighting installations while meeting strict CLASS 2 electrical regulations.
The 12V Hard-Wired Dimmable Driver is a steady low voltage power driver perfect for dimming LED lights without flickering. This transformer can power any of our dimmable LED lights while using an existing household dimmer. There's no need to rewire your kitchen cabinets or living room lights, just tap into the high voltage AC power near where you intend to install your energy-efficient LED product.
12V Hard-Wired Outdoor Non-Dimmable Drivers are energy-efficient, produce very little heat, and provide an even, stable current. In addition, these drivers have an IP rating of IP67 which means they are wet location rated and suitable for outdoor use.
The Array™ Inline Dimmer is made especially for the Array™ 24V Linkable Light Bars and is the perfect low profile control system for your Array Bar configuration. With the same dimensions as the Array bar, it attaches seamlessly into any array installation and is easy to use.
The 24V Listed Hard-Wired Dimmable Driver is a steady low voltage power driver perfect for dimming LED lights without flickering, whether indoors or in a protected location outdoors. This transformer can power any of our dimmable LED lights while using an existing household dimmer. There’s no need to rewire your kitchen cabinets or living room lights, just tap into the high voltage AC power near where you intend to install your energy-efficient LED product. And this driver has no minimum load requirement.
The 24V Hard-Wired Non-Dimmable Driver provides steady 24 Volt current along with high efficiency, so you will get the most from your LED lights and see savings on your power bill. The 24V driver is energy-efficient, eco-friendly, and safe, and produces very little heat. The 96 Watt driver is wet location rated and suitable for an outdoor or indoor LED installation.
The APOLLO DMX Color Controller is a custom programmable color control with an internal memory that is compatible with our entire line of Diode LED RGB strip lights and fixtures. Designed by our own team of engineers, this device puts fully customizable pre-programmed light shows at the hands of even the most inexperienced user. The APOLLO’s 4-channel output connects directly to our 12V DC RGB strip lights and a male 3-pin XLR port connects directly to our SPLASH Series Color-Changing Wall Washers.
The Apollo Jammer is an audio interface and color controller that connects color-changing RGB fixtures to an audio device like an MP3 player or a home/professional sound system via a standard headphone jack.
The ARRAY Linkable Light Bar features a patented modular design that allows you to create a seamless LED light installation. With the use of the included ARRAY Bar-to-Bar Connector (DI-0266), any two ARRAY bars of any length can be directly joined end-to-end. This means there are no gaps in the light put out by these sleek and compact bars.
BLAZE High Output Strip Light has twice as many LED bulbs as the FLUID VIEW Strip Light, so it offers twice the brightness. It has the same ultra-low profile as the FLUID VIEW strips, which means it will fit in almost any lighting installation. This light is only one third of an inch wide and one tenth of an inch high, and comes with a 3M adhesive backing that ensures easy mounting virtually anywhere.
This strip has twice as many LED chips as the FLUID VIEW Strip Light, so it offers twice the brightness. It has the same ultra-low profile as the FLUID VIEW strips, which means it will fit in almost any lighting installation. This flat strip is only a quarter inch high by a third of an inch wide, so it can be installed in many small or difficult locations, whether indoors or outdoors.
Diode LED’s longest and slimmest wall washer, at under 3 inches wide, the BROADWAVE LED Wall Washer hugs close to a wall or or ceiling. This wall washer is ideal for billboards and other outdoor signage, as well as exterior architectural applications. Heat shrink tubes included. Comes with two sturdy mounting brackets.
The CASCADE LED Light Bar Kit is a simple, all-inclusive package that enables you to set up a small indoor LED light installation in minutes. This kit is ideal for a closet, cabinet, shelf or workstation. This kit features BLAZE High Output Strip–twice as bright as FLUID VIEW Strip–and comes ready for installation.
The CASCADE Wet Location RGB Light Bar offers color-changing light for use indoors and outdoors. This multi-color LED Light Bar has the same housing as the CASCADE Light Bar, and draws the same small amount of electricity: only 3.6 - 7.2 Watts! With its compact sizes, this RGB LED light fixture makes a great accenting tool to add colorful decorative light to any home or business.
The CASCADE Light Bar is twice as bright as the SUNRISE Light Bar, using high-power tri-chip SMD bulbs. It's dimmable, waterproof (but not submersible), and wet location rated (IP68). With its compact size, this super bright fixture makes a great alternative to the fluorescent tube.
An excellent substitute for hot halogen and unsightly fluorescent lighting, the CAST LED Puck Light is a slim, modern, and earth-friendly indoor light fixture. CAST LED Puck Lights are available in two versions: dimmable and non-dimmable. This puck light is perfect for all recessed cabinet and under cabinet lighting, as well as furniture, shelf, display-case, and accent lighting. Producing 270 lumens of light output while consuming a mere 3.6 Watts of electricity, the CAST LED Puck Light is your brightest option available.
CAST LED Puck Light Kits are a quick and easy way to get everything you need for an LED lighting installation. Each plug-and-play kit includes LED lights, a Plug-In Adapter, an Inline Dimmer Switch or Inline On/Off Switch, and assorted DC connectors that help give you a maximum of installation options. These are self-contained kits and need no special tools for assembly.
CHROMAPATH™ Aluminum Channels offer an elegant solution for enclosing strip light in a protective and lightweight enclosure. Choose one of the four styles with a Clear or Frosted lens to create a customized lighting fixture with a professional finished look.
The DAZZLE High Output RGB Strip Light offers all the same features and advantages as our standard SPECTRUM LED Strip Light, but has twice as many luminaires and is twice as bright. This strip light transforms a living room, rec room or home entertainment center into a place for parties and special events.
The DAZZLE Wet Location High Output RGB Strip Light offers all the same features and advantages as our SPECTRUM Wet Location RGB Strip Light, but is twice as bright.
Double BLAZE™ LED Strip Light is a super bright LED strip that is twice as bright as our BLAZE™ LED Strip Light and four times as bright as FLUID VIEW LED Strip Light. This LED tape light is our brightest strip and features two parallel rows of densely-packed, high output LED lights.
EMBER Mist Resist™ Strip Light is the perfect LED lighting option for indoor areas exposed to occasional splashing or excessive dust and dirt.
The FLUID VIEW Strip Light is a light fixture that has it all. It’s cuttable to a custom length and dimmable. It’s extremely low-profile, at a tenth of an inch high and third of an inch wide, so it can be used virtually anywhere. It’s a 12V fixture that draws less than 1.5 Watts per foot, so it’s very economical. To top it off, it comes in a rainbow of colors: warm white, cool white, amber, pink, red, green, blue, and purple.
FLUID VIEW Wet Location Strip Light is commercial-grade strip designed for outdoor and indoor home and business use and is waterproof (but not submersible) with a wet location rating of IP68. Drawing only 1.44 watts of power per foot, these dimmable strips are extremely energy-efficient.
The High Power RF Color Controller is a wireless radio frequency micro-control unit used for commanding any of our full-color RGB LED lights over long range distances. The High Power RF RGB Controller includes a wireless handheld remote control that allows you to change the mode, speed, and up to 256 levels of brightness from 150 feet from the controller.
This sleek and low profile on/off switch responds to the slightest change in the infrared light spectrum and turns on the light when you open a closet or cabinet and turns off when the door is closed.
K-RANGE High Output Tunable Color Strip Light gives you total control over the white color temperature of your LED lighting. With the K-RANGE Dual Slide Switch you can choose the exact color temperature you desire.
With the K-RANGE Dual Slide Switch you can choose the exact shade of white light for the K-RANGE Tunable Color Strip Light (DI-1101, DI-1106), as well as dim your lights from 100% to 5%. This strip light enables you to set up dimmable, color-temperature-controlled white LED lights.
The LightTouch™ LED Dimmer Switch is a compact and dynamic tool for dimming of LED lighting. Featuring a fully touch-sensitive housing, for full dimming control and for turning your lights on and off. The LightTouch™ LED touch dimmer features DC plugs that are standard to all our DC plug accessories.
A lithium-ion battery designed specifically to integrate with our light bars, strip lights, and any 12V DC LED light. This battery comes with an extension cable featuring DC plugs that connects directly to any Diode LED fixture or accessory that has a DC plug.
REIGN 12V/24V Dimmer Switches are manufactured for Diode LED as electronic low voltage dimmers that fit right into a standard wall light switch box. These dimmers are connected between the 12V or 24V DC power supply and 12V or 24V LED fixture, and will dim any of Diode’s LED lights that are dimmable.
The LED Wi-Fi Controller puts the dimming and RGB color control of your LED lights into you mobile device. Touchscreen compatibility with Apple products (Ipod, Ipad, Iphone) and Android (phone and tablets) allows control from anywhere within Wi-Fi range.
The RGB Mini Controller is not only our smallest color controller yet, but it is also our easiest to use. With two models available, you have the choice of either remote control or local control for your color changing installation.
The RGB Zone System consists of the RGB Zone Receiver and the RGB Zone Remote, which can control up to 10 independent RGB Zone Receivers (remote and receivers must be paired during installation). For use with RGB color changing strip light or light bars, the RGB Zone System is capable of 18 built in color modes as well as a color picker ring on the remote. The Zone Remote has an ergonomic shape and is rechargeable.
This strip light’s low profile and narrow width allows uses in many discreet locations. The height of the SIDEWINDER Vertical Strip Light is a mere 0.2 inches, so it will fit virtually anywhere, with a 3M™ adhesive backing that permits easy mounting. The flat-style 12V LEDs cast light sideways at a 90 degree angle from the strip surface, instead of straight out like all other Diode LED strip lights.
Allows you to select colors and color-changing modes for color-changing RGB fixtures with the included wireless remote control.
Amplifies the color signal and power on sections of SPECTRUM and DAZZLE High Output RGB Strip Light longer than 16 feet, and is great for tight spaces. It can be used for wet location outdoor LED lighting.
If you run a restaurant, club, bar, art gallery or any number of other venues, and would like to achieve elegant décor through lighting, you may need our SPECTRUM RGB Signal Amplifier. An RGB Color Controller can command up to 16 feet of RGB strip lights. But if you want to run more than 16 feet of strip lights on one continuous RGB signal, you will need an RGB signal amplifier.
Allows you to power and color-control sections of SPECTRUM and DAZZLE High Output RGB Strip Light greater than 16 feet by amplifying the controller signal and the power.
SPECTRUM Wet Location Strip Lights are designed to add vibrant color to exteriors and interiors with eco-friendly, full-color LED lighting. SPECTRUM RGB Light Strips Wet Location can bring out your creative side, whether in a home or business.
This LED spotlight is only 7 inches in diameter, so it can tbe used for stage and theater spotlighting, club flood lighting, and exterior and interior architectural accent lighting. It has a projection distance of up to 115 feet (in the 15° version). Heat shrink tubes included.
The fixture is UL Listed and made of light but strong aluminum alloy, built for durability and stability. One wall washer holds 36 energy-efficient LED bulbs and consumes less energy than a single 60 Watt light bulb. This LED Wall Washer comes with a hard-wired power cable that plugs directly into a wall outlet.
A sleek, wet-location (but not submersible), dimmable fixture that requires very little power. The SUNRISE Light Bar is a low-profile LED bar that’s a mere half inch wide and quarter inch high. This bar will light shelves, cabinets, and other tight spaces that a standard bulb cannot.
This IP68-rated module is perfect for use in wet locations such as decks and railings, in displays and exhibits, and for small spotlighting. It is available with either a light beam angle of 15° that provides more focused spot light, or with the wider 45° beam angle, which has more of a flood light spread.
Strip Light Channels protect and provide light diffusion for most of Diode LED's strip lights. The sturdy but lightweight matte anodized aluminum Channels are available in four versions: the QUAD is a square-shaped channel that mounts flush on a surface; the ORB has a rounded shape that lets you adjust the angle of the channel; the NOOK has a right-angled shape that allows for mounting in a corner so that light shines at a 45° angle; and the SLIM is a low-profile channel.
The TRUE FOCUS LED Tube Light is one of our most efficient fixtures, with an energy usage of just 1.44 to 3.6 Watts per tube. The dimmable TRUE FOCUS LED Tube’s compact size fits into almost any space, while offering maximum adjustability: the included mounting clips allow you to position the bar at just the angle you need, for back wash or uplighting.
The TRUE FOCUS™ Color-Changing Tube Light is one of our most efficient fixtures, with an energy usage of just 1.44 to 3.6 Watts per tube. The TRUE FOCUS™ Color-Changing Tube Light's compact size fits into almost any space, while offering maximum adjustability. The included mounting clips allow you to position the bar at just the angle you need for your configuration. With a surface-mount RGB LED and wide 120° flood angle, this full color LED light bar is seamlessly bright and adds dynamic color accenting to any lighting situation, whether a special event or permanent installation.
A super bright 12V DC LED strip that is 50% brighter than BLAZE High Output Strip Light and four times as bright as FLUID VIEW Strip Light.
A super bright 24V DC LED strip that is 50% brighter than BLAZE High Output Strip Light and four times as bright as FLUID VIEW Strip Light. The ULTRA BLAZE 24V High Output Strip Light is packed with high power 5050 tri-chip surface mount diode (SMD) LEDs that combine to make a brighter, more value-driven, and warmer light than any fluorescent or incandescent fixture.
The VoltaMax High Output Rechargeable Battery Pack is a lithium-ion battery designed specifically to power our LED light bars, Flexible LED Strip Lights, or any 12V LED light. This battery has over three times the capacity of Diode's PortaVolt battery, and will power one of our 20" TRUE FOCUS LED Tube Lights for a full 52 hours.
The VoltaMax™ II High Output Rechargeable 12V Battery Pack is a lithium-ion battery and recently updated for better performance with 12V DC LED light. The battery pack can be recharged without limitations and gives longer battery life for portable LED applications.
The Wall Mount RGB Color Controller is an advanced wireless micro-control unit used for controlling any color-changing SPECTRUM RGB Strip Lights or TRUE FOCUS RGB Tube Lights. This package features the color controller, a lightweight wall-mounted wireless remote control, and a wireless handheld remote control, all of which allow you to change the mode, speed, and brightness of your full color LED lighting, whether RGB strip lights or light bars.